Once the adapter's IP has been set, the drive can be connected to the adapter (through an RS232 cable) and the adapter to the network using a switch. When the menu appears, follow the instructions from the adapter's user manual. The " RealTerm" configuration is similar to the one presented in the adapter's user manual for the Hyper Terminal application in Windows XP.Īfter setting-up, power ON the adapter while keeping the "X" key pressed. One of the options is " RealTerm", which is free and can be downloaded from the following links: or in Windows 7 or later a third party Hyper Terminal application should be used. The step by step instructions are presented in the attached manual in Windows XP there's the Hyper Terminal from Microsoft that can be used to configure the adapter. To configure the adapter's IP a Hyper Terminal is required The IP can be the default one (if the adapter is connected directly to the Ethernet port of the PC running the EasyMotion Studio software) or an IP from the network's IP range (if the adapter is connected to a switch/router). To connect a Technosoft drive to the PC through the Ethernet-to-RS232 adapter, the IP of the adapter has to be configured first. This article refers to the "007 - RS232 to Ethernet adapter"
0 Comments
Leave a Reply. |